DrayTek
  VigorSwitch P2260 PoE Ethernet Switch
  • 24 10/100BaseT RJ45 Ethernet Ports
  • 2 10/100/1000BaseT (Gigabit) RJ45 Ethernet Ports
  • PoE Power for LAN devices (e.g. IP Phones, IP Cameras)
  • 2 SFP (Fibre Module) Ports
  • Port Based and 802.1q VLAN
  • Quality of Service (QoS) Prioritisation
  • Layer 2 Fully Managed
  • 802.1x Security
  • Port Bandwidth Control
  • Port Mirroring
  • RFC 2544 Performance Compliant
This product has been discontinued. Please look at the VigorSwitch P2261 instead.

VigorSwitch P2260 - 24 Port Managed Switch with PoE

SFP Ports on DrayTek vigorSwitch P2260

The VigorSwitch P2260 is a high-performance fully-managed layer 2 Ethernet switch. Its specification is packed with advanced features to aid reliability and switching performance to your network. The P2260 has 26 Ethernet Ports (24 Fast Ethernet, 2 Gigabit) and two SFP ports (for fibre connection modules). The units can be stacked, meaning that up to 16 can be linked and managed from one web interface. Features for Quality of Service (QoS), VLANs and network/switch security provide additional flexibility.

The VigorSwitch P2260 is a PoE (Power over Ethernet) switch. The used wires on the RJ45 connector are used to carry power to the remote device so that the connected device does not need its own local power supply (e.g. mains adaptor). This is particularly useful for devices such as IP Telephones or IP Cameras where local power may not be available but also where an extra PSU would add unnecessary clutter and increased power consumption.

The DrayTek P2260 has two SFP (Fibre Module) ports. In comparison to 'copper' (RJ45), using fibre for uplinks provides longer range and reliience from electrical interference. Each of the two ports can be used instead of the corresponding copper port (Ports 25 and 26). The SFP port provides compatibility with your choice of SFP module and therefore the most appropriate fibre technology for your application.

The VigorSwitch P2260 is a fully managed Layer 2 switch, not a basic 'Smart Switch' (which is typically an unmanaged switch with some monitoring/control features). A comprehsive GUI (Web Interface) provides intuitive control and monitoring of the switches features.

DrayTek VigorSwitch Port Visual Snapshot
The Web interface of the switch shows a static snapshot visual represenation of port status.

VigorSwitch P2260 PoE Managed Switch - Specification

  • Physical Interfaces:
    • 24 10/100BaseT Ethernet Ports (RJ-45 802.3/3u)
    • 2 10/100/1000BaseT (Gigabit) Ethernet Ports (Ports 25 & 26 802.3ab)
    • 2 SFP Dual-media Ports (Ports 25 & 26 IEEE 802.3z )
    • RS-232 Serial Console Port
  • PoE Specification
    • 24-ports 802.3af PoE PSE
    • Endpoint with 48VDC Power through RJ-45 pin 1,2,3,6
    • PoE Activity LED Indicator
    • 185 Watts of Total Power ( up to 15.4 Watts per port )
    • Auto Detection of Powered Device (PD) and Consumption Levels
    • Supports per Port Power Consumption Monitoring
    • Smart Feature for PD on/off, PD Detection, Power Level, PD status and Power feeding Priority
    • Circuit Protection to Prevent Power Interference between Ports
    • Supports per Port PoE State Setting
    • Supports per Port Power priority Setting
  • Performance/Capacity:
    • 24 Megabit & 2 Gigabit Ethernet ports with non-blocking wise speed performance
    • 8000 MAC addresses
    • 256K Packet Buffer and 128K Control Memory
    • 802.3x Flow Control capability
  • VLAN:
    • Port-based VLAN
    • 802.1q tag-based VLAN
    • Up to 256 active VLANs
    • Port IDs 1-4094
    • Support Q-in-Q VLAN (for Subscriber Aggregation)
    • Multicast VLAN Management
    • Management VLAN - Restrict admin interface to VLAN member(s)
    • GVRP/GARP
  • QoS:
    • Supports QCL for Layer 4 TCP/UDP Port
    • IP ToS QoS
    • Diffserv DSCP Classification
    • Supports 802.1p QoS with four level priority queue
    • WRR or Strict priorities
    • MAC Priority QoS
    • Supports priority in a Q-in-Q tag
  • Bandwidth Control:
    • Bandwidth rating per port
    • Selectable Ingress/egress limit 500K/bps to 100M/bps (Ports 1-24)
    • Selectable Ingress/egress limit 500K/bps to 1000M/bps (Ports 25-26)
  • Protocol support:
    • LACP: 2 Fast Ethernet and 1 Gigabit group (up to 4 members each)
    • Multicast: IGMP snooping. Active and passive mode
    • STP/RSTP: 802.1d/1w
  • Network Security:
    • 802.1x access control for port based and MAC based authentication
    • Isolated Group/Restricted Group
    • Management Access Policy Control
    • Access Control List
    • IP-MAC Port binding
    • Unknown Unicast/Broadcast/Multicast Storm Suppression
  • Port Mirroring
  • SNMP V1,V2c Network Management
    • RFC 1213 MIB ( MIB-II)
      • Interface MIB
      • Address Translation MIB
      • IP MIB
      • ICMP MIB
      • TCP MIB
      • UDP MIB
      • SNMP MIB
    • RFC 1757 RMON MIB
      • Statistics Group 1
      • History Group 2
      • Alarm Group 3
      • Event Group 9
    • RFC 1493 Bridge MIB
    • RFC 1643 Ethernet MIB
    • Enterprise MIB
  • LED Indicators:
    • Power
    • Ports 1-26 LINK/ACT/PoE
    • Port 25 & 26 SFP Operation
  • Rack-Mountable
  • Power Requirements: 220-240VAC. 12W.
  • Environment: Operation Temperature:~0°C~45°C. Storage Temperature:-10°C~70°C
  • Dimensions: 209 x 442 x 44 mm (L x W x H):
  • Weight: 3.3Kg (excluding SFP modules/cables)
  • ROHS & CE Compliant
  • Warranty : 1 Year Manufacturer's RTB