Expired

IV. Voice-over-IP (VoIP)

Expired

Call18866 SIP Setup

Products:
Vigor 2820
Keywords:
Call18866

Call1899.com

Before starting, you must already have an account with Call18866; open an account with them at www.call18866.com. Set your SIP settings on your router as shown in the screenshots below (choose the picture corresponding to your own DrayTek Vigor model below). In all cases, replace the 'xxxx' in the diagram with your own Call118866 registered telephone number. The password to enter is your Call18866 account number.

One the router has registered with the Call18866 SIP server, you can make calls over the Call18866 service simply by lifting your handset, dialling the number (with full STD or International prefix) and ending with the # key. For example to dial a UK number it would be :

[ Lift Handset ] 020 8999 1234 #

or for a number in the USA :

[ Lift Handset ] 00 1 555 909 1234

That's all !

You can see their own FAQ here.

Note that Call18866 provides outgoing calls only - they do not currently provide a phone number for you to receive calls on.

In the setups below, your password is your Call18866 customer number and your username is 18866xxxxxxxxxxx (where xxxxx is your Call18866 registered phone number).


Vigor2100V Setup :

v2100v


Vigor2500V Setup :

v2500v


Vigor2600V / Vigor2900V Setup :

v2600v
Note : As the Vigor2600V/2900V routers have two phone ports, you
can set both ports to use Call18866 if you want to.

How do you rate this article?

1 1 1 1 1 1 1 1 1 1