Expired

IV. Voice-over-IP (VoIP)

Expired

How do I dial IP addresses from the phone handset?

Products:
Vigor 2135ax
Vigor 2760
Vigor 2762
Vigor 2763
Show all

Keywords:
Dial
IP Address
VoIP

Instead of using a SIP registrar or a remote VOIP user stored in your dialplan, you can lift the handset and dial an IP address directly. That address must be the WAN-side (internet facing) IP address of another VoIP device which supports the same Codecs as your device.

You cannot dial alphanumeric addresses or @ symbols (to do so, use a dial-plan entry - see later). To dial an IP address, start and end it with a # (hash) replace the dots with * (star). Therefore, for example, to dial user at IP address 212.123.45.12 you dial #212*123*45*12#

How do you rate this article?

1 1 1 1 1 1 1 1 1 1

Add a comment to this article

In the below box, you can add comments which you consider might be helpful to other users reading this article:

(Will be shown on your comment)
(Optional, Not shown/published)


NOTE : All comments are reviewed before publication and may not be posted or may be redacted if the editors do not consider them helpful. The use of offensive or obscene language, copyrighted material, or advertising or promotion or linking to any other product or service is prohibited. By submitting your comment, you confirm that you are the original author and assign copyright of the content to DrayTek indefinitely and irrevocably.