Expired

I. Product Setup Guides

Expired

WireGuard VPN from Windows to Vigor Router

Products:
Vigor 2962
Vigor 3910
Keywords:
Router
VPN
Windows

WireGuard is a secure, fast, and modern VPN Protocol. A WireGuard VPN connection is made by exchanging public keys and intends to be considerably more performant than OpenVPN. We support the new VPN protocol on Vigor2962/3910 routers since firmware version 4.3.1. This article will show how to establish a WireGuard VPN tunnel between Vigor3910 and Smart VPN Client.

Vigor Router Setup :

1. Go to VPN and Remote Access >> WireGuard

  • Click Generate a Key Pair.
  • Enter WireGuard Interface IP.(We can use Vigor Router’s LAN IP as the WireGuard Interface IP)
  • Click OK to save.

2. Go to VPN and Remote Access >> Remote Dial-in User to create a profile.

  • Check Enable this account.
  • Check WireGuard as Dial-In Type.
  • Enter Username.
  • Assign a Static IP Address.
  • Click Client Config Generator.

  • Click Generate a key pair.
  • Click Generate for Pre-Shared Key(Optional).
  • Enter a Persistent Keepalive value. (By default, Persistent Keepalive is set 60 seconds on Vigor Router. We recommend remaining in this setting when your peer is behind a NAT or a firewall.)
  • Enter VPN server's IP or Domain Name.
  • Check Set VPN as Default Gateway(Optional).
  • Click Download Client Config to download the .conf file.
  • Click Apply to Profile & Close.
  • Click OK to save the profile.

VPN Client Setup(SmartVPN Client v5.6.3) :

0. Click here to download WireGuard client, then install it. Wireguard VPN would not work on SmartVPN Client if we did not install primeval Windows Wirguard Client on the PC.

1. Open the SmartVPN Client.

  • Click Add to create a new profile.
  • Select WireGuard for the Type.
  • Paste the correct file path and click Import.
  • Click OK to save.

2. Select the profile created on step1. Then click Connect to activate the tunnel.

3. Ping a remote network IP(e.g.,Vigor3910’s LAN IP) to establish the VPN connection and check if the VPN works correctly.

VPN Client Setup(WireGuard Client) :

0. Click here to download WireGuard client, then install it.

1. Open WireGuard Client.

  • Click Add Tunnel.
  • Choose the .conf file downloaded from the VPN server.
  • Choose this profile and click Activate.

Now the status shows "Active".

Ping a remote network IP(e.g.,Vigor3910’s LAN IP) to establish the VPN connection and check if the VPN works correctly.

We can also check the VPN connection status in Router’s VPN Connection Status page.

Add a comment to this article

In the below box, you can add comments which you consider might be helpful to other users reading this article:

(Will be shown on your comment)
(Optional, Not shown/published)


NOTE : All comments are reviewed before publication and may not be posted or may be redacted if the editors do not consider them helpful. The use of offensive or obscene language, copyrighted material, or advertising or promotion or linking to any other product or service is prohibited. By submitting your comment, you confirm that you are the original author and assign copyright of the content to DrayTek indefinitely and irrevocably.