Vigor Rack Mount Bracket
|RM1 / 4719853551794||Rack Mount Bracket|
The RM1 Rackmount Bracket enables you to fit any Vigor 2820, 2830, 2920, 3200, 2925 or 2860 series router into a standard 19" rack or cabinet. The bracket takes up one rack slot (1U). The front mounted sockets remain fully accessible. A cable retainer is fitted at the back to hold the power cord captive to avoid accidental disconnection. For wireless models, we then recommend extension aerials (or aerial extension cables - see ANT-BAS1) as your rack will generally interfere with wireless signals if the aerials are mounted inside.
The RM1 is supplied with four M5 screws (cage nuts are not supplied)
The RM1 is a steel bracket which can mount the Vigor 2860 router, or any of our other products using the same case (Vigor 2820, 2830, 2920 etc.) into a standard 19" rack. It is 1U height. When fitted, the router is held firmly and cannot be removed, pushed back or fall off the bracket accidentally.
The router must be fitted into the bracket before you fix the bracket into your rack. To fit it correctly, locate the groove around the edge of the front panel of the router. The front of the RM1 bracket slides into this groove, therefore preventing the router from moving once fitted.
The router's power cable can be inserted into the plastic retainer to help prevent it being pulled out accidentally from behind when you are rummaging around your rack/cabinet:
Once the router has been dropped into the groove, you can fit the bracket into the rack using the screws supplied: