Expired

XIII. IPPBX

Expired

How do I set the mic / speaker volume?

Products:
VigorPhone 350
Keywords:
Audio
Handset
IPPBX
VigorPhone 350
Show all

The Handset, Headset and Speaker volume levels can be configured as required

The settings for Handset, Headset and Speaker volume can be set via [Phone] -> [Voice Settings]

Voice Settings

Handset Digital In Gain: Set the volume sent in from a digital handset from Level 1-20. Default is Level 10.

Handset Analog in Gain: Set the volume sent in from an analog handset from Level 1-20. Default is Level 10.

Handset Out Gain: Set the volume sent out from the handset from Level 1-20. Default is Level 10.

Speak Out Gain: Set the volume sent out from the microphone from Level 1-20. Default is Level 10.

Mic Digital In Gain: Set the volume sent in from a digital microphone from Level 1-20. Default is Level 10.

Mic Analog in Gain: Set the volume sent in from an analog microphone from Level 1-20. Default is Level 10.

Headset Digital In Gain: Set the volume sent in from a digital headset from Level 1-20. Default is Level 10.

Headset Analog In Gain: Set the volume sent in from an analog headset from Level 1-20. Default is Level 10.

Headset Out Gain: Set the volume sent out from the headset microphone from Level 1- 20. Default is Level 10.

How do you rate this article?

1 1 1 1 1 1 1 1 1 1


Add a comment to this article

In the below box, you can add comments which you consider might be helpful to other users reading this article:

(Will be shown on your comment)
(Optional, Not shown/published)


NOTE : All comments are reviewed before publication and may not be posted or may be redacted if the editors do not consider them helpful. The use of offensive or obscene language, copyrighted material, or advertising or promotion or linking to any other product or service is prohibited. By submitting your comment, you confirm that you are the original author and assign copyright of the content to DrayTek indefinitely and irrevocably.