Expired

IV. Voice-over-IP (VoIP)

Expired

VoIP FAQ: Intercom Facility

Products:
Vigor 2135ax
Vigor 2760
Vigor 2762
Vigor 2763
Show all

Keywords:
Analogue
Intercom
VoIP

Can I call between the two ports?

Yes, if your router has two VoIP phone ports (e.g. Vigor2820Vn) you can make a call from one phone to the other locally - this is sometimes known as an 'intercom' facility. Lift the handset and dial 10# or 20# for the appropriate port. Do not set any dial-plan entries which conflict with these codes.

On older VoIP models dial 01 or 02 for the appropriate port

How do you rate this article?

1 1 1 1 1 1 1 1 1 1

Comments

From: Mr R M Crorie
20/06/2014

Please note that THIS DOES NOT WORK unless you FIRST use Telnet to log into the router (see elsewhere on this site if you are not sure how to do this) and use the following command to enable the facility:

voip dialplan local 1

I spent hours trying to achieve this, until I discovered that Draytek have missed out this essential step... :(


Add a comment to this article

In the below box, you can add comments which you consider might be helpful to other users reading this article:

(Will be shown on your comment)
(Optional, Not shown/published)


NOTE : All comments are reviewed before publication and may not be posted or may be redacted if the editors do not consider them helpful. The use of offensive or obscene language, copyrighted material, or advertising or promotion or linking to any other product or service is prohibited. By submitting your comment, you confirm that you are the original author and assign copyright of the content to DrayTek indefinitely and irrevocably.