IV. Voice-over-IP (VoIP)
ExpiredHow do I use X-Lite to call the Vigor ?
Firstly, you will need an account with a SIP registrar, for example draytel.org. Let's assume we have an account called
Next, create a phone book entry for the Vigor router which you wish to call - i.e. their registered SIP name.
Select the entry, then press the green dial key in X-Lite, and it should dial and the remote Vigor2600V should ring.
We strongly recommend the use of headphones for PC VOIP software - speakers really do not work well due to the allowances that have to be made for feedback/mics. Note also that X-Lite does not allow you to select the data rate, therefore on slow (e.g. narrowband, midband or analogue) or distant international links you cannot select the 8Kb/s protocols which might be better suited. This may result in choppy audio.
How do you rate this article?
Add a comment to this article
NOTE : All comments are reviewed before publication and may not be posted or may be redacted if the editors do not consider them helpful. The use of offensive or obscene language, copyrighted material, or advertising or promotion or linking to any other product or service is prohibited. By submitting your comment, you confirm that you are the original author and assign copyright of the content to DrayTek indefinitely and irrevocably.