Mailing List
Mailing List
Sign Up Here
Like, follow & share: visit DrayTek UK's Facebook page visit DrayTek UK's Twitter page visit DrayTek UK's Linkedin page
DrayTek

Vigor 2952 - Older Firmware

Firmware Information
Current Version

3.8.9

Release Notes

Release Date 06/06/2018
Support Language English

IMPORTANT NOTE :
Firmware is normally supplied in two different styles: The ALL file will just upgrade the firmware, whereas the RST file will upgrade the firmware and wipe all settings back to factory defaults.

 

IMPORTANT NOTE : Bandwidth Limit & Remote Management

If Bandwidth Limit is configured and enabled on the Vigor 2952, keep using 3.8.8.2 firmware and wait for the next firmware release. The 3.8.9 firmware cannot be managed through the Web UI if Bandwidth Limit is enabled on the router.

In the event that the router has been upgraded to 3.8.9 and Bandwidth Limit is enabled, either of these two methods can be used to regain access to the router’s web interface:

  1. Disable Bandwidth Limit function by telnet or ssh with command “ip bandwidth off”
  2. Temporarily disconnect the WAN cables from the router’s WAN ports, to access the router’s Web UI from the LAN and disable Bandwidth Limit
Model Search:
MD5 Checksum : 0288d83dda5b45d08f19e7b8acf7c6e8            SHA1 Checksum : cc6a224c80cae9803d8a8c108393b6b0e765de3d
MD5 Checksum : 9b78c20c4e776ef09a16b9906d1d3491            SHA1 Checksum : 3e930daf914c5a8a36205f8b0585faa78bf30c53