Mailing List
Mailing List
Sign Up Here
Like, follow & share: visit DrayTek UK's Facebook page visit DrayTek UK's Twitter page visit DrayTek UK's Linkedin page
DrayTek

Vigor 2952 - Older Firmware

Firmware Information
Current Version

3.8.9

Release Notes

Release Date 06/06/2018
Support Language English

IMPORTANT NOTE :
Firmware is normally supplied in two different styles: The ALL file will just upgrade the firmware, whereas the RST file will upgrade the firmware and wipe all settings back to factory defaults.

 

IMPORTANT NOTE : Bandwidth Limit & Remote Management

If Bandwidth Limit is configured and enabled on the Vigor 2952, keep using 3.8.8.2 firmware and wait for the next firmware release. The 3.8.9 firmware cannot be managed through the Web UI if Bandwidth Limit is enabled on the router.

In the event that the router has been upgraded to 3.8.9 and Bandwidth Limit is enabled, either of these two methods can be used to regain access to the router’s web interface:

  1. Disable Bandwidth Limit function by telnet or ssh with command “ip bandwidth off”
  2. Temporarily disconnect the WAN cables from the router’s WAN ports, to access the router’s Web UI from the LAN and disable Bandwidth Limit
Model Search:
MD5 Checksum : e9c5a8d37f49f089e54871b42f2de2ca            SHA1 Checksum : 8e856a085a1d51e8e7f8ccf15cd51fa91e6c818f
MD5 Checksum : 6d04fb9f2baad416a648aac5c08a3f68            SHA1 Checksum : b5984863683d88f1031a06db20fd21ccd1a611e8
MD5 Checksum : 06ba4766a65dab5b9aeed9fdaf90630a            SHA1 Checksum : 2ebaf60e6ad1efbc7cd1be199389746a19a76cfe