Mailing List
Mailing List
Sign Up Here
Like, follow & share: visit DrayTek UK's Facebook page visit DrayTek UK's Twitter page visit DrayTek UK's Linkedin page
DrayTek

Vigor 2952 - Older Firmware

Firmware Information
Current Version

3.8.9

Release Notes

Release Date 06/06/2018
Support Language English

IMPORTANT NOTE :
Firmware is normally supplied in two different styles: The ALL file will just upgrade the firmware, whereas the RST file will upgrade the firmware and wipe all settings back to factory defaults.

 

IMPORTANT NOTE : Bandwidth Limit & Remote Management

If Bandwidth Limit is configured and enabled on the Vigor 2952, keep using 3.8.8.2 firmware and wait for the next firmware release. The 3.8.9 firmware cannot be managed through the Web UI if Bandwidth Limit is enabled on the router.

In the event that the router has been upgraded to 3.8.9 and Bandwidth Limit is enabled, either of these two methods can be used to regain access to the router’s web interface:

  1. Disable Bandwidth Limit function by telnet or ssh with command “ip bandwidth off”
  2. Temporarily disconnect the WAN cables from the router’s WAN ports, to access the router’s Web UI from the LAN and disable Bandwidth Limit
Model Search:
MD5 Checksum : d8d7b0b6580a35c0ca4fb95cab33814a            SHA1 Checksum : e26f5aa6bda1b2a96fbbe0e3d88031c3662559f4
MD5 Checksum : 6c06528aad6846a2fd2a6fe4c750259d            SHA1 Checksum : 903e7508c1d756252ced98af92155f645f7385a5