Expired

XIII. IPPBX

Expired

How do I view SIP Debug logs on the VigorPhone?

Products:
VigorPhone 350
Keywords:
Debug
Handset
IPPBX
Logs
Show all

The SIP debug logs, showing all SIP messages sent and received by the VigorPhone, can be viewed by enabling debug mode on the VigorPhone and connecting to the VigorPhone using the DrayTek UDP Client.

Debug mode should be enabled on the VigorPhone and the DrayTek UDP Client should be downloaded and installed on the PC.

Download DrayTek UDP Client

Enable debug mode from the HTTP Web Interface in [Phone Settings] > [Other Settings]:

DrayTek Logo

Run the DrayTek UDP Client and enter the IP Address of the VigorPhone. If required, the SIP debug logs can be output to a text file

DrayTek Logo

How do you rate this article?

1 1 1 1 1 1 1 1 1 1

Add a comment to this article

In the below box, you can add comments which you consider might be helpful to other users reading this article:

(Will be shown on your comment)
(Optional, Not shown/published)


NOTE : All comments are reviewed before publication and may not be posted or may be redacted if the editors do not consider them helpful. The use of offensive or obscene language, copyrighted material, or advertising or promotion or linking to any other product or service is prohibited. By submitting your comment, you confirm that you are the original author and assign copyright of the content to DrayTek indefinitely and irrevocably.