DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
3300V Plus VPN Trunking question
- B2Bsteve
- Topic Author
- User
-
Less
More
- Thank yous received: 0
29 Jun 2010 12:06 #62554
by B2Bsteve
3300V Plus VPN Trunking question was created by B2Bsteve
I am looking to put in a couple of 3300 V+ boxes to improve speed and availability for our remote site.<br/>
Question is as follows:<br/>
If 3300 has 2 Wan connections and you have VPN configured with Trunking - if 1 line goes down will the vpn traffic automatically switch over to other line?<br/>
Also does it do Failover + loadbalancing or Failover OR loadbalancing.... ideally we need both!<br/>
<br/>
Don't really want to shell out cash only to find out they dont quite do the job I want.<br/>
<br/>
Thanks<br/>
Steve
Question is as follows:<br/>
If 3300 has 2 Wan connections and you have VPN configured with Trunking - if 1 line goes down will the vpn traffic automatically switch over to other line?<br/>
Also does it do Failover + loadbalancing or Failover OR loadbalancing.... ideally we need both!<br/>
<br/>
Don't really want to shell out cash only to find out they dont quite do the job I want.<br/>
<br/>
Thanks<br/>
Steve
Please Log in or Create an account to join the conversation.
- asimm.it
- Offline
- Member
-
Less
More
- Posts: 156
- Thank yous received: 0
29 Jun 2010 13:37 #62561
by asimm.it
Replied by asimm.it on topic 3300V Plus VPN Trunking question
hi steve,<br/>
<br/>
i would say it does both.<br/>
<br/>
<URL url="http://www.draytek.com/user/SupportLiveDemoDetail.php?ID=63"><LINK_TEXT text="http://www.draytek.com/user/SupportLive ... .php?ID=63">http://www.draytek.com/user/SupportLiveDemoDetail.php?ID=63</LINK_TEXT></URL><br/>
<br/>
go to Network then click WAN.<br/>
<br/>
There are radio buttons for failover & backup. if you enable both you can clearly see that Load balance check box and the Backup Master / Slave radio buttons are not dimmed and can be selected.<br/>
<br/>
hope this helps answer your question.
<br/>
i would say it does both.<br/>
<br/>
<URL url="http://www.draytek.com/user/SupportLiveDemoDetail.php?ID=63"><LINK_TEXT text="http://www.draytek.com/user/SupportLive ... .php?ID=63">http://www.draytek.com/user/SupportLiveDemoDetail.php?ID=63</LINK_TEXT></URL><br/>
<br/>
go to Network then click WAN.<br/>
<br/>
There are radio buttons for failover & backup. if you enable both you can clearly see that Load balance check box and the Backup Master / Slave radio buttons are not dimmed and can be selected.<br/>
<br/>
hope this helps answer your question.
Please Log in or Create an account to join the conversation.
Moderators: Admin3, Christopher
