Hi
We are trying to configure our vigor 2830 to do the following:

a) 1 SSID -> Internal 10.0.0.x Network, DHCP From Win Server Local clients hard wired via switch into this network.
b)1 SSID -> For guest internet access on a different IP range DHCP from 2830-> Block access to 10.0.0.x network.

Results:
a. Works by creating ssid 1 enable VLAN to P1-3 disable DHCP Force DNS in LAN general lan setup.
b. Does everything except go out via DNS so can ping ip but cannot resolve addresses.

MAC Address IP Address Subnet Mask DHCP Server DNS
LAN1 00-50-7F-7C-F9-88 10.0.0.254 255.255.255.0 No 194.176.65.5
LAN2 00-50-7F-7C-F9-88 192.168.3.1 255.255.255.0 Yes 194.176.65.5

Any ideas?

Many thanks