DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2280x ACL IP4 Ports
- rich205
- Topic Author
- Offline
- Banned
-
Less
More
- Posts: 5
- Thank yous received: 0
08 Feb 2021 16:32 #98404
by rich205
2280x ACL IP4 Ports was created by rich205
Hi, im here for a little advice please.<br/>
<br/>
Now I might be doing something stupid, don't rule that out but for the life of me I can't work out how to block a range of ports in the ACE settings for IP4.<br/>
<br/>
In ACE under source port I can block individual ports fine, if I try adding a range say 6000 to 6100 it just comes back as failed. But I can add each port I need to be blocked by making individual ACL for each port number and assigning them in ACE. <br/>
<br/>
It's annoying. I have updated firmware etc but cant work this out.<br/>
<br/>
Any ideas?
<br/>
Now I might be doing something stupid, don't rule that out but for the life of me I can't work out how to block a range of ports in the ACE settings for IP4.<br/>
<br/>
In ACE under source port I can block individual ports fine, if I try adding a range say 6000 to 6100 it just comes back as failed. But I can add each port I need to be blocked by making individual ACL for each port number and assigning them in ACE. <br/>
<br/>
It's annoying. I have updated firmware etc but cant work this out.<br/>
<br/>
Any ideas?
Please Log in or Create an account to join the conversation.
Moderators: Admin3, Christopher
