Hi - Not sure if this is the right place to post my question.<br/>
<br/>
I have a Vigor 2862ac Firmware 3.9.9.2 BT and an AP800 firmware 1.1.6.2<br/>
I have enabled AP Management and Auto Provision in the AP800.<br/>
<br/>
I have it all working by logging into the AP800 and configuring it but am now trying to use Central Management in the 2862 to configure the AP800.<br/>
<br/>
In the 2862 I can see the AP800 and its status is shown as Online.<br/>
I can create a profile for this (Profile 2) and set everything and can send it to the AP800 but the event log shows it failed. Any advice why?<br/>
<br/>
Do I need to tick "Apply ACL Confuguration only" on the send to AP screen?<br/>
<br/>
I'm using Firefox on windows 11 pro.<br/>
<br/>
This has also got me thinking, at the moment I am using only one 2.4GHz SSID and none of the 5GHz SSID's. I'm also looking at advantages of 5GHz and looking to try that out. I have also bought a AP903 and thinking of extending coverage throughout the house and maybe look at Mesh. So I have lots of questuions and reading to do.<br/>
I know the AP800 does not support Mesh. <br/>
<br/>
Any advice on my first question above is appreciated.<br/>
<br/>
Also any pointers on reading matter for the additional information also much appreciated.<br/>
<br/>
<br/>
Thanks for your help.<br/>
<br/>
Happy New Year.
